Home
About Us
Brand introduction
Company profile
Development
Quality control
Production capacity
Certification
Products
Straight travel control valves
Angular travel control valves
Metallurgical control valve
Water conservancy control valve
Dedicated / Special control valve
General valve series
Actuators and Accessories
Equipment and Devices
Support
Install and use
The resources
Common standard
Sample manuals
Application
Valve in pneumatic conveying system
Application in petrochemical tank area
News
Company news
Industry news
Comtact Us
Contact
CH
EN
How the globe valve works
Globe valve, also known as cut-off valve, is one of the most widely used valve companies. Due to the small friction between the sealing surfaces during the opening and closing operation, it is more durable, the opening height does not change much, the manufacturing technology is convenient, and the maintenance management is convenient. , not only for medium and low pressure, but also for high pressure. The closing principle of the globe valve is to close the sealing surface of the valve disc and the sealing surface of the valve seat through the pressure of the valve stem to prevent the medium from flowing.
04
2022
/
07
What are the characteristics of the globe valve?
The structure of the globe valve is simpler than that of the gate valve, and it is more convenient to manufacture and maintain. The sealing surface is not easy to wear and scratch, and the sealing performance is good. There is no relative sliding between the disc and the sealing surface of the valve body when opening and closing, so the wear and scratch are not serious, the sealing performance is good, and the service life is long.
18
01
Composition and use of pneumatic control valve
Pneumatic regulating valve is composed of two parts: pneumatic actuator and regulating mechanism. The regulating mechanism is roughly the same structure as most regulating valves, and the difference is mainly in the actuator. The pneumatic actuator can generate corresponding thrust according to the size of the control signal to push the valve to move. Under the action of the thrust of the actuator, the pneumatic control valve will produce some displacement or rotation angle to directly adjust the flow of the fluid.
19
2021
05
Congratulations to the website of Shanghai Goflow Moyer Fluid Tech Co., Ltd. on the line!
"Goflow" is a combination of "Gold" and "Flow." Gold stands for the quality of products like gold. It's our eternal goal. "Flow" stands for the fluid control industry we're engaged in, because we've been concentrating on this industry, so we're the most professional.
2023